konexsi modem usb pada back track 4

bagi teman teman yang ingin mengkoneksikan modem usb pada back track 4 bisa ikuti perintah2 di bawah ini:

root@home:~# wvdialconf
sintak di atas adalah untuk melihat ports modem kita apakah sudah terditeksi atau blom

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB1<*1>: Speed 9600: AT -- OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB1: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
root@home:~#

Kemudian seting wvdial.conf dengan emnuliskan sintak berikut ini pada root contoh :
root@home:~# kate /etc/wvdial.conf
kemudian akan muncul tampilan sebagai berikut :

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
; Phone =
; Password =
; Username =

kemudian ganti atau copi paste sintak di bawah ini pada wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Phone = *99#
Password = user
Username = pass
Stupid Mode = 1

setelah itu save

kemudian untuk memanggil atau mengkoneksikan modem ke internet cukup dengan menuliskan sintak "wvdial": pada root
contoh :
root@home:~# wvdial

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Jun 22 14:01:21 2009
--> Pid of pppd: 6150
--> Using interface ppp0
--> pppd: ???[08][10]??[08]
--> pppd: ???[08][10]??[08]
--> pppd: ???[08][10]??[08]
--> pppd: ???[08][10]??[08]
--> pppd: ???[08][10]??[08]
--> pppd: ???[08][10]??[08]
--> local IP address x.x.x.x
--> pppd: ???[08][10]??[08]
--> remote IP address y.y.y.y
--> pppd: ???[08][10]??[08]
--> primary DNS address a.a.a.a
--> pppd: ???[08][10]??[08]
--> secondary DNS address b.b.b.b
--> pppd: ???[08][10]??[08]

setelah iu kita sudah dapat berinternetan menggunakan backtrack 4 deh

slamat mencoba






Tutorial ini saya dapat dari

http://forums.remote-exploit.org